|
|
|
Plinius P10 Power Amplifier
|
Although our entry-level amplifier, the P10 has a level of sophistication rarely found in such a cost-effective product. The PLINIUS Odeon development has had a dramatic effect on the design and implementation of this very desirable amplifier. The Odeon power supply has been mirrored in a smaller more cost effective way and the new circuit uses faster driver devices with separate input and driver stage power supply regulation.This has delivered an amplifier capable of true high-end performance.
The large toroidal transformer will allow the P10 to deliver power levels in excess of 200 watts per channel into 8 Ohms. Difficult speaker loads are driven with ease to the most satisfying levels,while maintaining control and finesse.
The ideal partner for the P10 is the PLINIUS M8 Preamplifier. The stable mates will combine to perform at the highest level. The P10 is also highly suited to multiple custom installation use.
The chassis has been fashioned from robust materials including a forged and anodised fascia of gratifying solidity. The fascia and accents are available in either silver or black to match with other ancillary equipment.
PRODUCT SPECIFICATIONS
| Power: |
200 Watts RMS per channel into 8 Ohms. Both channels driven from 20Hz to 20kHz at less than 0.2% total harmonic distortion |
| Frequency Response: |
20Hz to 20kHz ±2dB. -3dB at 5Hz and -3db at 70kHz |
| Distortion: |
Typically <0.05% THD at rated power, 0.2% THD and IMD worst case prior to clipping
4 Ohm Power: 300 Watts per channel or greater |
| Current Output: |
40A short duration per channel. Fuse protected |
| Hum & Noise: |
90dB below rated output 20Hz to 20kHz unweighted |
| Slewing: |
50V/uS |
| Gain on RCA Inputs: |
32dB |
| Gain on XLR Inputs: |
38dB |
| Input Impedance: |
47,000 ohms |
| Dimensions: |
Height 120mm (3.75"), Width 450mm (17.75"), Depth 400mm (15.75"), Weight 14kg (30lb) |
Back To Top
|
Brand: Plinius Audio
|
|
|
|
| |
|
|
Last Updated:
|
Products 
