The TL-5.5 all tube line stage preamplifier is designed for maximum performance from a single ended line source. It's distinguishing musical characteristics are defined by its clarity, agility, and exceptional soundstage. Over and over again, listeners describe the listening experience as "three dimensional... deep soundstage... precise instrumental images... accurately conveys the ambiance of the concert hall..." This high performance work horse is a totally dual mono design with separate power supply for each channel. The best quality parts are used throughout this system -- with all Multi caps in the signal path. With 6 line inputs, 2 pairs of outputs and 1 balanced output, 1 tape loop, 1 external processor loop (for home theater), 1 record out, and optional internally retro-fittable phono stage which supports low output moving coil, you can rest assured that this preamp will plug and play into your existing system and more than meet your most demanding audio and video needs with super sound. Remote control for volume, mute and phase reversal are all standard.
Designed to give you maximum control over a wide variety of sources, you'll be surprised how easy it is to fit the TL5.5 within your budget. Visit your nearest dealer and bring one home to listen now. We're confident that this is one investment you'll be happy with for a long, long time.
TL5.5 Features
-
High current output, pure tube circuit.
-
Stiff power supplies for each gain stage
-
6 line inputs (5 with phono), 2 pairs single ended RCA outputs, 1 tape loop, 1 record output, 1 external processor loop for home theater.
-
Optional internally retro-fittable phono stage, with dedicated power supply.
-
Front panel controls: source selector, balance, volume, tape, processor, mute/operate, on/off.
-
Auto mute turn-on circuit, utilizing two color LED.
-
Relay switching.
-
Simplest direct circuit path for purest musical sound and high reliability.
-
Audiophile quality laser trimmed Alps volume and Noble balance controls.
-
High quality VTL gold plated RCA jacks.
-
High quality glass fiber circuit board with heavy copper traces.
-
Heavy 16 gauge chassis construction, with well shielded power supplies.
-
Toroidal power transformers.
-
Detachable IEC power cord.
-
Totally dual mono with separate power supply for each channel.
-
Audiophile-grade Multi caps in signal path.
-
Balanced and single-ended outputs.
-
4-function remote control: Volume up & down, Mute, Phase.
-
Front panel and remote controlled phase reversal switch.
-
Low output moving coil or moving magnet input on optional phono stage.
TL-5.5 Preamplifier Data Specifications
| Vacuum Tube Complement |
2 x 12AX7, 4 x 12AT7 |
| Inputs |
6 Single ended Line inputs
2 RCA Processor / Tape in
|
| Outputs |
1 pair XLR Balanced, 2 pairs Single-ended RCA
2 pairs Processor / Tape Out
|
| Remote Control Functions |
Volume, Mute and Phase Flip |
| Gain |
20 dB |
| Output Impedance |
195 Ohms |
| Input Impedance |
20K Ohms |
|
Frequency response
+ 0 - 3 dB
|
1 Hz - 60KHz |
| Maximum Output Voltage < 1% THD |
45 Volts |
| Channel Separation |
> 80 dB @ 1KHz |
| Power Consumption |
150 Watts |
| Dimensions (W x D H) |
19 x 14 3.75 inches
48.25 x 35.5 x 9.5 cm
|
| Weight |
30 lbs (13.75Kg) Fully packed |
TL5.5 Phono Stage
| |
MM |
MC |
| Tube Complement |
2x12AT7,2x12AX7 |
2x12AT7, 4x12AX7 |
| Gain |
45 dB |
68.0dB |
| Cartridge load impedance |
47 kOhms |
300 Ohms |
| Minimum Recommended Cartridge Output |
6 mV |
0.1 mV |
| Signal to Noise Ratio |
85 dB |
70 dB
|
Back to Top
|