ProAc D100 Reference

The imposing new Response D100 takes on the mantle of flagship model from our legendary Response Four, which has delighted discerning audiophiles for the last twelve years.

Only the development of an entirely new generation of sensitive drive units has allowed the Fours to be eclipsed – these new drivers produce a much more dynamic sound with greater efficiency, giving high sound levels without the need for high output amplifiers. Good quality valve or Class A transistor amplifiers with an output as low as 10 watts will produce fine results.

Tall, slim, deep and elegant, these beautiful handcrafted cabinets, finished in real wood veneers, are exceptionally rigid. Cabinet colouration is kept to a minimum by covering inner surfaces with sounddeadening material, acoustic wadding and the use of resistive shelving. An entirely new porting system means that room placement of the cabinets is much less critical and the 100’s will perform superbly in rooms of most layouts and sizes.

The innovative drive unit layout has ensured greaterdispersion and a seamlessly integrated sound.Two new professional quality 10” bass drivers are mounted on the baffle either side of two exciting new 3” midrange units and a one-inch soft dome tweeter. Married by a complex HQC crossover network and connected by ProAc oxygen-free copper wiring, this formidable combination of drive units produces one of the most coherent and expansive sounds in modern hi-fi.

The D100’s produce stunning music, effortlessly. The enhanced sensitivity extracts the tiniest detail from any recording without brightness or exaggeration. Greater bandwidth creates a huge soundstage, drawing in the listener and creating a concert hall experience, where the loudspeakers seem to melt from the scene.

D100 Specifications 

Nominal Impedance 4 ohms

Recommended Amplifiers 10 to 750 watts

Frequency Response 20hz to 30Khz

Sensitivity 92db linear for 1 watt at 1 metre

Bass Driver (2) Professional quality long-throw 10” (254mm) unit with large magnet assembly and 3” (75mm) ribbon wound voice coil

Midrange Driver (2) Studio quality 3” (75mm) soft dome unit with double suspension

Tweeter ProAc 1” (25mm) soft dome with special surround and front plate

Crossover HQC crossover using dedicated components wired throughout with ProAc multistrand oxygen-free copper cable. Split for optional bi-wiring and bi-amping.

Dimensions 65” (1650mm) high on plinths with conical feet 12” (305mm) wide 19” (482mm) deep

Weight 289 lbs (131kg) /cabinet

Mode Floorstanding

Grille Acoustically transparent crimplene

Download Data-Sheet

Back To Top