//
Home arrow Products arrow Speakers arrow Subwoofers arrow Martin Logan Depth i Subwoofer

Product search

Type in a keyword




Martin Logan Depth i Subwoofer

Martin Logan Depth i Subwoofer

Depth i deploys the full array of MartinLogan's advanced subwoofer technologies to achieve deep, rich, satisfying bass while preserving electrostatic-like accuracy and detail. Its TriLinear™ BalancedForce™ alignment, advanced low-distortion switching amplifier, and sophisticated triple-servo control systems extract the very best possible performance from Depth i's high-resolution 8-inch aluminum-cone drivers.

TriLinear BalancedForce places the subwoofer's three drivers precisely 120 degrees apart from each other in the cabinet. Their reaction force vectors meet at the center and exactly cancel, virtually eliminating cabinet resonance and vibration. Gone with them are the cabinet-radiation coloration and bass blur that afflict even the best conventional subwoofers. The triple-servo system, meanwhile, ensures that the output from the drivers themselves – the output we want – is always an absolutely faithful replica of the audio input signal.

Depth i provides much of the performance of our flagship Descent i subwoofer from a cabinet 40% smaller. It blends easily into any high-performance stereo music or multi-channel home theater system. In fact, with its easily accessible top-mounted controls and separately configurable LFE and two-channel inputs, Depth i's performance can be independently optimized for home-theater and stereo operation in the same system.

Martin Logan Depth i Subwoofer

 

Depth i Specifications

Frequency Response:

20–120 Hz ±3dB; Anechoic through LFE effects input

Low Pass Filter Frequencies:

30, 35, 45, 55, 65, 80Hz

High Pass Filter Frequencies:

Bypass, 40Hz, 70Hz

Phase:

0°, 90°, 180°, 270°

25Hz Level Control:

±10 dB

Woofer Type:

Three 8" (20.3cm) high excursion, aluminum cone with extended throw drive assembly, sealed non-resonant asymmetrical chamber format

Amplifier:

350W (at less than 0.5% THD)

900W (peak)

Inputs:

Left/Right RCA Line Level, RCA LFE, Speaker Level

Outputs:

RCA Sub Out (all inputs summed), RCA Right/Left (with High Pass Filter)

Input Impedance:

20,000 Ohms

Power Draw:

Max: 300 Watts

Idle: 15 Watts

Standby: 10 Watts

Weight:

70 lbs. each (31.8 kg)

Dimensions (HxWxD):

17.9" × 17.1" × 16.5" (45.4 × 43.5 × 41.8 cm)

 

Back To Top 

 


Brand: Martin Logan Electrostatic Speakers

 

Last Updated: